منزل المنتجاتمبرمج مفتاح السيارة

BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool

BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool

    • BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool
    • BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool
    • BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool
    • BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool
  • BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool

    تفاصيل المنتج:

    Place of Origin: China
    اسم العلامة التجارية: Hippotech

    شروط الدفع والشحن:

    Minimum Order Quantity: 1pc
    Packaging Details: Standard export package
    Delivery Time: Within 1-2 working day upon receipt payment
    Payment Terms: T/T, MoneyGram, Paypal
    Supply Ability: 1000pcs/week
    ﺎﺘﺼﻟ ﺍﻶﻧ
    مفصلة وصف المنتج

     

    BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool

     

    BMW Multi  Tool latest software V4.9

    Powerful than AK300!!!



    BMW Multi Tool includes forth parts, hardware device, dongle, programmer, software. Before running software you must connect dongle and hardware device to computer.

     

    V4.1 update instructions:


    1.Using the vehicle ignition switch is directly generated dealers key
    2.Support the latest version of the the ISTA P45/ISTA P46 downgrade access to anti-theft data area, when lost them all to generate the distributor key.
    3.Bug repair
    4.Only in 4.0 on the basis of some bug fixes, not to add new features


    New software update:V3.0, here is update tips:


    1.The software v3.0 must be run above firmware V1.0.4.
    2.You can go to Help->Device Update->Device Update to update your device to the newest version.
    3.Once you update your firmware when use V2.5 software. It does not need update the firmware again.
    4.add italian and spanish language.
    5.Normal bug fix.

     


    Description:


    1. OBD II CONNECTOR: Connects the tool to the vehicle's Data Link connector (DLC).
    2. Dongle: USB dongle.
    3. USB CONNECTOR: Connects the tool to the PC/Laptop through USB Cable.
    4. Programmer: Program keys.
    5. Programmer Female Pin: Connects programmer to device.
    6. Programmer Male Pin: Connects programmer to device.


    Specifications:


    1. Operating Temperature: -20 to 70 °C ( -4 to 158 °F )
    2. Storage Temperature: -40 to 85 °C ( -40 to 185 °F )
    3. Diagnostic Interface: 16 PIN
    4. USB Interface: USB 2.0
    5. Power: DC 5 V - 12 V
    6. Consumption: 1 W
    7. Dimensions: Length 95 mm, Width 49 mm, Height 28 mm


    Function:

    BMW MULTI TOOL supported function including:

    1. Car access sytem dentification
    2. Read/Write CAS EEPROM(OBDII)
    3. Read/Write KM stored in CAS system(OBDII)
    4. Read/Write synchronization codes stored in CAS system(OBDII)
    5. Synchronize DME and CAS(OBDII)
    6. Synchronize CAS and ELV(OBDII)
    7. Prepare dealer key for CAS1/CAS2/CAS3/CAS+(support latest CAS3 verison)(OBDII)
    8. Read/Restore CAS KEY information(OBDII)
    9. Disable/Enable key with working key(OBDII)
    10. Clear DTC and Shadow (OBDII)
    11. Prepare dealer key with CAS eeprom dump
    12. Unlock dealer key prepared with our software with CAS eeprom dump or KEY information
    13. Change KM in CAS and instrument dashboard with file dump
    14. Have key programmer, you can programm dealer key directly.

    Pay attention to the function: Help->Device update. You can get the latest software version and firmware verion when you can access to internet.
    1. Menu:
    - Tool: you can choose language here, support "English" and "Chinese Simplified" Restart software to apply your settings.
    - File Make Key: you can prepare dealer key with EWS and CAS EEPROM dump.
    - Help: Device update. You can get your device and dongle id version and update it.

    2. Protocal type:
    Now BMT support there type of protocol: KWP-CAN BUS 100Kbps, KWP-CAN BUS 500Kbps, KWP-2000. "Auto Detect " function can help you to choose the right protocol. After choose protocol okay, then press "Connect". If connected success. All CAS info will display in CAS Identification. Include CAS number, VIN, production date, etc.

    3. EEPROM Function:
    Read EEPROM, Write EEPROM, Save File, Load File…
    1). You should backup the CAS EEPROM before prepare dealer key. After succeed read EEPROM, please save it as back file. This step is very important.
    2). Now can't read the whole EEPROM for cas3 system. But the main section is contained. It should be saved. When you read CAS EEPROM, it will give tips (Press ok to continue).

    4. Odometer:
    Support read and change KM stored in CAS system.
    Don't support to change KM in instrument. If you want to change the KM display in instrument. You should change KM in CAS system first. Then modify the KM in instrument manually.

    5. Synchronization Codes:
    1). CAS3 code-DME, CAS3code-EGS: Read and write DME and EGS code stored in CAS3 system.
    2). Synchronize DME and CAS— this function will be useful while prepare dealer key or any other operation which cause can't start the engine.
    3). Synchronize CAS and ELV — this function can help clear wheel errors

    6. Key Learn
    Function introduction:
    1). Get Key Info: With this function you can get the key cutting, remote frequency, and key data.
    2). Save Key Info: Save the read key info.
    3). Load Key Info: Load the saved key info. To see the key data and prepare for write key info.
    4). Write Key Info: Write the loaded key info into CAS system.
    5). Make Dealer Key: You can prepare dealer key after you get key info successfully. Also you should choose the key position.
    6). Add key: Add the new dealer key into CAS system. Some CAS system needs this step to start the engine.
    7). Enable Key: Insert the current key into ignition switch, press "Enable Key". The key after current key will be enabled.
    8). Disable Key: Insert the current key into ignition switch, press "Disable key". The key after current key will be disabled.
    9). Clear DTC: Before prepare dealer key and after it you can use this function to clear DTC.
    10). Clear Shadow: Before prepare dealer key and after it you can use this function to clear Shadow.

    7. File Make Key
    1). Choose CAS or EWS type.
    2). Load the choose EEPROM file you will get the make dealer key window.
    3). Choose key position and press "Make Dealer Key" button. Flow the given tips to prepare dealer key. After succeed you can save the new EEPROM dump file.
    - For EWS1, EWS2, EWS3, EWS4, CAS1, CAS2, CAS3 type the prepared dealer key can start the engine directly.
    - For some CA3+ type you need to write back the new dump file into car.
    4). CAS3 encrypt data, only OBDII prepare make key is support for CAS3 encrypt data.


    Warning: Make sure connect dongle to compute before run the software.
    BMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing ToolBMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing ToolBMW Multi Tool OBD2 Car Key Programmer , CAS1 CAS3 Key Programing Tool

    تفاصيل الاتصال
    Hippo Technology Co.,LTD

    اتصل شخص: cathy

    إرسال استفسارك مباشرة لنا (0 / 3000)

    أفضل المنتجات
    منتجات أخرى
    السيارات وأدوات التشخيص

    أداة تشخيص محرك متعدد اللغات مع برنامج الكمبيوتر المحمول SSD Plus Panasonic CF19 I5 4GB

    أدوات تشخيص السيارات V2019.9 ميغابايت SD C4 بلاس ستار مع مجاني DTS موناكو / Vediamo

    أدوات تشخيص السيارات المعمرة BMW ICOM NEXT BMW ICOM A2 A + B + C Plus Lenovo X220 I5 4GB Laptop

    Doip أداة تشخيص الماسح الضوئي التلقائي USB Dongle لمرسيدس حتى 2019

    مبرمج مفتاح السيارة

    آلة القطع الرئيسية الأوتوماتيكية 200 واط Xhorse CONDOR XC-MINI Plus CONDOR XC-MINI II مع ضمان لمدة 3 سنوات

    CG Godzilla السيارات مفتاح آلة قطع دعم موبايل / كمبيوتر مع المدمج في البطارية

    التصنيع باستخدام الحاسب الآلي مفتاح السيارة مبرمج الروبوت اللوحي فورد Tibbe الفك FO21 المشبك 2019 SEC-E9

    AK500Pro AK500 PRO سوبر سيارة مفتاح مبرمج دون إزالة ESL ESM ECU لمرسيدس بنز

    X431 إطلاق الماسح

    قم بتشغيل Creader Car Diagnostic Scanner CRP Touch Pro 5.0 "نظام Android Touch Screen الكامل

    أداة خدمة تشخيص الوسادة التي تعمل بنظام Android ، قم بتشغيل X431 Scanner Free Update عبر الإنترنت لمدة عامين

    CRP 429C OBD2 رمز الماسح أداة تشخيص السيارات إطلاق X431 CRP429C للمحرك / ABS / SRS / AT

    أداة تشخيص Wifi Bluetooth الثقيلة للشاحنة ، الإصدار الأصلي X431 V + HD3

    طلب اقتباس

    E-Mail | خريطة الموقع

    Privacy Policy الصين جيّد جودة السيارات وأدوات التشخيص المزود. © 2012 - 2020 auto-diagnosticstools.com. All Rights Reserved.